|
MAXNC 15 CL
The MAXNC 15 CL2 is a closed loop version
of the MAXNC 15 stepper machine but using the MAXNC new CL2 motion
system for control. This new controller run 4 axes from a single parallel
port from any PC, 66 mega Hertz or
faster (486, Pentium, AMDK, etc.) from DOS or from WINDOWS. The control
reads the encoders at a rate of over 60,000 times a second and the
feed-back is analyzed by the software. Based on the position of the
encoders, the outputs to the motors are advanced, retarded or modified as
needed. The speed at which the software operates also allows the control
of the spindle motor speed from the CNC program. The servo motors used in
the CL2 systems are of step configuration to obtain very fast acceleration
an deceleration rates, important in continuous contouring operations.
Machine operates at up to 60 inches per minute with the standard 20
threads per inch screws.
Includes software package with a
mini CAM system for automatic NC program creation from CAD (DXF files).
MAX III software available January 30, 2008. P/N 22000................MAXNC 15 CL
W 16" X
TABLE......................... ......
$3,475.00 P/N 22100............MAXNC 15 CL 18 W " X TABLE .............................….. $3,595.00
P/N 22001.....MAXNC 15 CL W 16" X TABLE & 1/2 HP SPINDLE.....$3,620.00
P/N 22112.....MAXNC 15 CL W 18" X TABLE & 1/2 HP SPINDLE.....$3,740.00 P/N 22415........MAXNC 15 CL W 18" X TABLE & EMBEDDED COMPUTER.$4140.00
P/N 22230.……......3D DIGITIZER
...……................................................
$ 325.00 P/N 22260....…..….4TH
AXIS ROTARY TABLE .....…..........................
$ 495.00 Shipping and handling extra
|
MAXNC 15 CL
|
|---|
